SGC 420
Single genset controller
The SGC 420/421 controllers are modern genset controllers for both AMF applications with a mechanical and electronically controlled engine (CANbus) plus AMF applications with electronic governor.
The controllers provide you with a user-friendly interface and full graphics LCD and include voltage and frequency measurement for mains and gensets, and electrical load measurement (true RMS).Â
Configurable analogue and digital inputs/outputs are provided for various features.Â
Modbus over RS-485 and CAN ports are available for remote communication.Â
Start and stop gensets remotely using the Remote start/stop function.Â
Deep sleep mode is a useful feature that extends the battery lifetime by suspending the normal controller functions of when the genset is off.Â
The controller monitors engine safety, electrical load, site battery backup voltage and shelter temperature to reduce fuel consumption.Â
Configure parameters easily from a PC using DEIF Smart Connect utility software. Connect to the PC through the controllerâs USB Type B port.Â
In addition, the SGC 421 controller also includes an integrated electronic governing function.
Features
 | SGC 420 & 421 | AGC 150 Stand alone | SGC 410 | SGC 120 & 121 | SGC 110 |
-40 degree support | no | yes | no | no | no |
Built in electronic governor | yes | no | no | yes | no |
Engine and Generator protection | yes | yes | yes | yes | yes |
Engine CANbus | yes | yes | yes | yes | no |
Front mount | yes | yes | yes | yes | yes |
Generator current measuring | yes | yes | yes | yes | no |
Generator voltage measuring | yes | yes | yes | yes | yes |
Mains voltage measuring | yes | yes | no | yes | no |
PLC | no | yes | no | no | no |
RS485 | yes | yes | yes | yes | no |
Site battery monitoring | yes | no | yes | no | no |
Data Sheet
CGC 400
Compact genset controller
Compact genset controller (CGC 400)
The compact genset controller (CGC 400) is a cost-competitive but high-quality controller range for standby applications.
The microprocessor-based control units have been created to meet the requirements of the OEM industry and feature manual or auto start, protection and control of electronic and non-electronic gensets, as well as automatic mains failure (AMF).
The CGC modules monitor engine speed, frequency, voltage, and engine running hours, as well as warning and shutdown status of the engine or genset.
The controller is a highly versatile product with both fixed and flexible user-configurable inputs and outputs, enabling users to adapt the unit for a wide range of applications.
CGC 400 - The product
The compact genset controller (CGC 400) is based on standard advanced software of multi-line 2. The compact genset controller (CGC 400) cantains all necessary 3-phase measuring circuits, and all the values and alarms are presented on the LCD display. The CGC 400 will come in two different versions CGC 412 and CGC 413.Â
The CGC 412 is the unit that is able to perform auto start, and the CGC 413 is able to make the automatic mains failure (AMF) sequences. The hardware for the two products is different, therefore some of the sequences described in this document are only relevant to one of the variants. You will find a detailed description of the available functions in each product in the chapter "Standard Functions".
For detailed specifications of the hardware, please see the downloadable PDF below.
Features
 | CGC 400 |
PLC | yes |
Engine and Generator protection | yes |
Engine CANbus | yes |
Front mount | yes |
Generator voltage measuring | yes |
Generator current measuring | yes |
Mains voltage measuring | yes |
RS485 |
Data Sheet
On this page, you can download software updates for your product(s) and help yourself to various utility tools and add-ons that will assist you in setting up, detecting faults and configuring your product(s).
Please be advised that not all of our products can be updated by the user. Nor do all of our products come with a utility tool. Consequently, the list on this page cannot be considered an overview of our product programme.
SGC 120 & 121
Single genset controller
The controller stands out, featuring CANbus and Modbus plus it includes nine configurable inputs and six configurable digital outputs.Â
The controllers have a user-friendly interface and full graphics LCD. They include voltage and frequency measurement for mains and gensets, and electrical load measurement (true RMS). RS-485 and CAN port are available for remote communication. Start and stop gensets remotely using the Remote start/stop function.Â
Deep sleep mode is a useful feature that extends the battery lifetime by suspending the normal controller functions of when the genset is off.Â
Configure parameters from a PC using DEIF Smart Connect utility software. Connect to the PC through the controllerâs USB Type B port.Â
Besides, the SGC 121 controller also includes an integrated electronic governing function.
Features
 | SGC 120 & 121 | AGC 150 Stand alone | SGC 420 & 421 | SGC 410 | SGC 110 |
-40 degree support | no | yes | no | no | no |
Built in electronic governor | yes | no | yes | no | no |
Engine and Generator protection | yes | yes | yes | yes | yes |
Engine CANbus | yes | yes | yes | yes | no |
Front mount | yes | yes | yes | yes | yes |
Generator current measuring | yes | yes | yes | yes | no |
Generator voltage measuring | yes | yes | yes | yes | yes |
Mains voltage measuring | yes | yes | yes | no | no |
PLC | no | yes | no | no | no |
RS485 | yes | yes | yes | yes | no |
Site battery monitoring | no | no | yes | yes |
Data Sheet
SGC 110
Single genset controller
The SGC 110 controller has a user-friendly interface and full graphics LCD and includes engine safety monitoring, genset voltage and frequency measurement (true RMS).Â
Configurable analogue and digital inputs/outputs are provided for various features.Â
Start and stop gensets remotely using the Remote start/stop function.Â
Deep sleep mode is a useful feature that extends the battery lifetime by suspending the normal controller functions of when the genset is off.Â
Configure parameters from a PC using DEIF Smart Connect utility software. Connect to the PC through the controllerâs USB Type B port.
Features
 | SGC 110 | GPU-3 | AGC 150 Stand alone | SGC 420 & 421 | SGC 410 | SGC 120 & 121 |
-40 degree support | no | no | yes | no | no | no |
Built in electronic governor | no | no | no | yes | no | yes |
Din rail mount | no | yes | no | no | no | no |
Engine and Generator protection | yes | yes | yes | yes | yes | yes |
Engine CANbus | no | yes | yes | yes | yes | yes |
Front mount | yes | no | yes | yes | yes | yes |
Generator current measuring | no | no | yes | yes | yes | yes |
Generator voltage measuring | yes | no | yes | yes | yes | yes |
Mains voltage measuring | no | no | yes | yes | no | yes |
PLC | no | yes | yes | no | no | no |
Rear mount | no | yes | no | no | no | no |
RS485 | no | yes | yes | yes | yes | yes |
Site battery monitoring | no | no | no | yes | yes |